WEBSITE UNDER CONSTRUCTION – Call us for up-to-date inventory!
Starting with 11 gauge steel and years of design, Kodiak Standard-Duty Cutters provide powerful performance and a smooth cut. Quick Hitch compatible with many other great features make this cutter a dependable choice. Also available in Pull Type and 1 Point hitches…
Read more >
The Wood Chip U-Blade can transfer an ordinary crawler tractor into a wood chip-moving machine. The Wood Chip U-Blade has a unique wing configuration that provides aggressive side setting into the chip pile, quickly knocking down stacked chips and loading…
Read more >
Bradco's Vibratory Plow's hydraulic motor includes high-pressure seal and internal valve for extended motor life and performance. Two motor size options for maximum performance for almost any loader. Low-maintenance exciter unit generates up to 5,000 pounds of force. Optional hydraulic…
Read more >
The Bradco 612 Trencher uses a Category 1, three-point mount for 20–45 PTO HP hydrostatic tractors. This product is also available CE certified. PTO shaft-drive with heavy-duty slip clutch for overload protection Gearbox drive with chain reduction to the head-shaft…
Read more >
Bradco 330 Trenchers requires rear hydraulics to run the machine. Comes with light/medium duty boom and crumber with replaceable wear strips. Easy installation and operation. Category 1ASAE S217.12 standard, three-point mount for 15–30 PTO HP hydrostatic tractors Maintenance-free PTO shaft…
Read more >
Tree Booms are designed for many uses of placing loads such as trees (often called a Loader Boom), positioning rafters, placing items in truck boxes, etc., allowing an operator to place items with accuracy. Fully welded, square tube design Quick-attach…
Read more >
Designed as a tractor attachment, this Kodiak three-point trailer mover allows you to conveniently move your gooseneck and tongue-style trailers without using your truck. The trailer hitch is constructed of steel. It is equipped to attach a trailer ball with…
Read more >
The Kodiak Trailer Mover/Bale Spear combo is durable and built to last. 2" bolt in spear Category 1 hitch Steel construction 2"X2" lower reciever Upper plate to add ball hitch
Read more >
The Sweepster Tow-Behind Angle Sweeper is designed to be towed by truck or tractor. Available in 7, 8 or 9 ft. widths. Numerous configurations to match the needs of your material removal. Powered by two orbital hydraulic motors, hydraulic motor…
Read more >
The RMRM (Compact Tractor Angle Sweeper — Mechanical Three-Point Drive) is 24" diameter three-point hitch (cat 1) 540 PTO-driven broom. It is for tractors with 30 HP or less. The Sweepster RMRM is a good broom for snow removal, general…
Read more >
The RLH (Utility Tractor Rear-Mount Angle Sweeper — Hydraulic Drive) is a hydraulically driven three-point hitch broom for tractors with a 32” diameter brush. The Sweepster RLH is designed to run off the tractor hydraulics and can be used on…
Read more >
The RHFA (Utility Tractor Rear-Mount Angle Sweeper — Mechanical Three-Point Drive) is a 32" diameter tractor three-point hitch (cat 1 and 2) 540 PTO-driven broom. It fits tractors between 35–80 HP. The Sweepster RHFA is a very good broom for…
Read more >
The MRH Sweeper (Compact Tractor Angle Sweeper — Hydraulic Drive) is a hydraulically driven sweeper that is for mid-range tractors (less than 50 hp). It is offered with 26" and 30" diameter brushes. This is a very good broom for…
Read more >
The 36” diameter Sweepster HR broom (Utility Tractor High-Raise Angle Sweeper — Hydraulic Drive) is offered in both single and dual motor drives. The biggest advantage to the HR is its capability to lift over 36” above the ground, making…
Read more >
The Sweepster AH (Utility Tractor Angle Sweeper-PTO to Hydraulic Drive) (single motor) and CH (dual motor) brooms are hydraulically driven, 32” diameter front-mounted tractor brooms that can be run on a tractor's hydraulics system or with an optional pump package.…
Read more >
The MRHL (Compact Tractor Loader Angle Sweeper — Hydraulic Drive) is the same sweeper as the MRH, but mounts to the tractor's loader quick-attach for easy hookup and removal. It can be run on the tractor hydraulic system if it…
Read more >
Kodiak Standard Landscape Rakes feature multiple position angle settings and heavy wall steel construction. The standard-duty rake features a main angle beam that is 4" x 4" x 1/4". All tines are heat treated for long life. The tines are…
Read more >
Heavy steel pipe for consistent and smooth soil compaction 1” plug inlet for providing extra weight via water or sand Optional wheel package for pull type models for ease of handling
Read more >
This open-face design allows us to remove haylage and silage from bunkers. A full 96” wide cut with open design allows for great operator visibility, adjustable guides for depth of cut. Cutter made from abrasion-resistant steel for longer durability. Available…
Read more >
